Defender Ninety Jerry Can Hoodie - Dean's Classic Cars
Defender Ninety Jerry Can Hoodie - Dean's Classic Cars
Part of the Toolforged line, from Dean's Classic Cars. Every car in this line is built from the tools that kept it running — spanners, sockets, cogs, plugs and pressed steel, arranged until the shape of the car appears out of them. No badges, no wordmarks, no logos on the car itself: just the machine, drawn in the language of the workshop floor. If you have ever had the bonnet up on a cold morning with your knuckles bleeding and the radio on, this line was made for you.
A 1995 Defender Ninety, forged from the tools that kept it alive — on a 350 g/m² brushed-fleece hoodie for the coldest mornings with the bonnet up.
Front three-quarter, sat square on its wheels inside a thin concentric ring with Dean's signature across the top of it. Look once and it is a Ninety — the flat screen, the upright body, the short wheelbase, the toolkit lashed across the roof. Look again and the body panels are jerry cans, the grille is a socket set, and a long ratchet lies across the bottom of the ring like an underline. The plate is white, which is correct for 1995. The car itself carries no badge. It does not need one.
Built from the tools that built it.
Dean's Classic Cars is one man's obsession, made wearable. Dean has spent his life around British cars from the era when you could still fix one on your own driveway — and every design in the collection starts from a real car, checked against the real specification, before a single tool is drawn.
That matters, because the people who buy these know. They know how many wiper arms a Series 1 E-Type carried. They know a Mexico ran a pushrod Kent, not a twin cam. So nothing here is decorative guesswork. Get the car right and the artwork earns its place — on the wall, or on the back of a wardrobe.
Dean's Classic Cars is hosted and produced by Ricki Robin Ltd.
About this piece
The Defender sits in front three-quarter view, printed large on the front of a Stanley/Stella Cruiser 2.0 hoodie (STSU177) in black. Every panel of the body is assembled from steel — jerry cans laid along the flanks, a socket set where the grille should be, a toolkit strapped to the roof rack — drawn in bright metal against the dark cotton so the shape reads clean from across a room. The car carries no maker's badge anywhere on it.
Why this hoodie
350 grams per square metre with a brushed fleece interior — the weight you want on a cold morning with the bonnet up. The hood is self-fabric and double-layered, so it holds its shape instead of collapsing flat on your shoulders. Metal eyelets, a full-width front pouch pocket, ribbed cuffs and hem, and inside tape across the back of the neck.
The design is printed using Printful's DTFlex direct-to-film process, which lays a white underbase on dark cotton so the metal tones stay bright and the fine tool detail holds. The DTFlex print is designed to resist cracking, peeling and fading through normal wear and when washed according to the care label.
Product details
- Heavyweight build — brushed fleece interior — 350 g/m² (10.32 oz/yd²)
- Unisex fit — regular cut, set-in sleeves, ribbed cuffs and hem — sizes S to 2XL
- Hood and pocket — self-fabric double-layered hood, metal eyelets, front pouch pocket
- Constructed to last — single-needle topstitch at neckline and along the hood opening, inside tape at the back of the neck, self-fabric half-moon
- Material — 100% organic cotton
- Certification — GOTS and OCS certified organic cotton content; OEKO-TEX Standard 100; PETA-Approved Vegan
- Print specification — DTFlex direct-to-film with white underbase on dark colourways — 400 DPI source files
- Blank sourced — Bangladesh
- Available colourway — Black only — the Toolforged line is black-only by design, because the metal tones only read properly against it
Sizing
Designed to fit unisex, regular cut. Most buyers find their usual size sits well. If you are between sizes, size up — the heavier weight and the double-layered hood benefit from a touch of room. Imperial and metric charts are in the Size guide below.
Care
- Machine wash cold, inside out, with similar colours
- Tumble dry low
- Do not iron the print
- Do not dry-clean
Shipping and production
Made for your order. Nothing is sat in a warehouse waiting — this piece goes into production once your order has been placed, is printed and finished by our production partner, and then ships to you. Production typically takes 2–5 business days and UK delivery usually adds a further 2–5 business days on top, so most orders arrive within 1–2 weeks of ordering. We currently ship within the United Kingdom only.
Size guide
Imperial (inches)
| Size | Chest width (in) | Body length (in) | Sleeve length (in) |
|---|---|---|---|
| S | 21 ⅝ | 28 | 25 ⅜ |
| M | 23 ¼ | 29 ⅛ | 26 ⅛ |
| L | 24 ⅜ | 29 ⅞ | 27 |
| XL | 25 ⅝ | 30 ¾ | 27 ⅜ |
| 2XL | 27 ⅛ | 31 ½ | 27 ⅜ |
Metric (cm) — chest / length / sleeve: S 55 / 71 / 64.5 · M 59 / 74 / 66.5 · L 62 / 76 / 68.5 · XL 65 / 78 / 69.5 · 2XL 69 / 80 / 69.5.
Flat measurements, taken garment-flat. Chest width is half the chest. Allow up to 5 cm tolerance.
GPSR & Safety Information
- Manufacturer: Ricki Robin Ltd, 66 Paul Street, London, EC2A 4NA, United Kingdom — support@ricki-robin.com
- EU Responsible Person: Sinden Ventures Limited, Markou Evgenikou 11, Mesa Geitonia 4002 Limassol, Cyprus. For product safety or compliance enquiries please contact support@ricki-robin.com (we will forward to the EU Responsible Person).
- Garment blank: Stanley/Stella STSU177 Cruiser 2.0 hoodie. Composition, country-of-origin and care per the manufacturer's spec sheet.
- Product-safety concerns: email support@ricki-robin.com with subject line "PRODUCT SAFETY CONCERN" and your order number. Full disclosures on our Legal Notice.